TIMKEN Spherical roller bearing 24036 CA/W33
Product Description
Bore Size: 0 - 180 mm
Outside Diameter: 0 - 280 mm
Model Number: 24036
Type of goods: spherical roller bearing 24036
Weight: 22.5kgs
Width: 100mm
Spherical Bearing Features:
1) Spherical roller bearing are principally provided with two rows of symmetrical spherical rollers and a commonsphere raceway in out ring.
2) With good self-ali gning ability and can operate when the shaft deflection under load or the shaft deflection underload or the shaft misalignment in mounting, and their permissible aligning angle is 1 to 2.5 degree
3) This type of bearings has heavy load carrying capacity and anti-impact ability, in addition to radial loads, theyalso can carry axial loads in two directions
4) In general, this type of bearings permits a low limiting speed.
Spherical Roller Bearing Application:
Self aligning roller bearings apply to precise instrument, the electrical appliance of low noise, automobile, motorbike and other machines. It is used the most widely in mechanical industry.
Types of spherical roller bearing:
C: Stamped steel retainer and strengthened symmetric rollers for considerably higher load ratings;
CA: one piece brass retainer and strengthened symmetric rollers;
exchange with C design, especially for large size.
MB: Two-piece precision-machined brass retainer and strengthened symmetric rollers;
equivalent to C design in load capacity.
CC: steel cage, replace traditionalbrass cage.
E: Third generation design to improve stress distribution for much longer service life
TN: Nylon retainer.