single row deep groove ball bearing 6212 size 60*110*22mm
Product Description
single row deep groove ball bearing 6212 size 60*110*22mm
Quick Details:
Structure:deep groove
Type:ball
Bore size:60mm
Outside diameter:110mm
Width:22mm
Weight:0.79kg
Number of Row:single row
Place of origin:Sweden
Seals type:open, ZZ,2RS
Jinan Kaiming Bearing Co.,Ltd can supply normal bearings and non-standard bearings. Also can customize bearings as drawing or samples.
Description:
Deep Groove Ball Bearing is the most representative rolling bearing, it can suffer from both axial and bidirectional radial load. It can be used in these occasions with the demand of high rotation, low noise, and low oscillation. Bearing with seal together with steel cover of rubber seal usually filled with lubricant in advance ,the outside ring with stopping circle or flange ,these will not only be easier for axial orientation ,but also good for the installing of outside shell. The size of maximum loading bearing is just the same as standard bearing ,while with backfill trough in the inside and outside ,which can add the balls, and improve the maximum load at the same time.
Deep groove ball bearing types:
1.A single deep groove ball bearing
2. With dust cover single deep groove ball bearing
3. With dust cover, sealing ring single deep groove ball bearing outer ring, have
4. Stop moving slot and stop ring single deep groove ball bearing
5. Have put the ball of the gap of deep groove ball bearings
6. Double row deep groove ball bearing